Constructing A Byzantine Sundial-Calendar - Part 7 (Making The Gnomon & Support Rings)
Added 2019-05-02 01:06:12 +0000 UTCHi Folks,
In this episode I complete the final components of the mechanism, please enjoy!
Cheers,
Chris.
ps If you're following along with your own build in real time you can now download all of the drawings in the one document (see below this post)
Direct video links:
Youtube: https://youtu.be/6oxn3Rjo0RE
Vimeo: TBA
-------------- Video Notes: ---------------
Project Plans
Clickspring Byzantine Sundial-Calendar - Inch.PDF
Clickspring Byzantine Sundial-Calendar - Metric.PDF
Amazon Affiliate links:
Cameras:
Panasonic GH5 - https://amzn.to/2rEzhh2
Panasonic X920 - https://amzn.to/2wzxxdT
Tools & Shop Products:
Dykem blue: http://amzn.to/2plmLlx
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Anytime Tools 5 Lathe Mill CENTER DRILL : https://amzn.to/2IThppO
Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit: https://amzn.to/2Pmegkq
Blue Matador Abrasive Paper:https://amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: https://amzn.to/2NwcM6y
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers:https://amzn.to/2EArNRU
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: https://amzn.to/2DR5fdb
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: https://amzn.to/2G7ylv6
Anytime Tools 5 Lathe Mill CENTER DRILL : https://amzn.to/2IThppO
Hegner Scroll Saw: https://amzn.to/2IhteVW
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: https://amzn.to/2PkyoTV
Tix Solder: http://amzn.to/2G4lUiE
Tix Flux 1/2oz: http://amzn.to/2G85OEZ
Super Pike Saw Blades Size 4/0 pkg of 144: https://amzn.to/2A3nKN3
Blue Matador Abrasive Paper: https://amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: https://amzn.to/2NwcM6y
3pc Wiss Tin Aviation Snips: https://amzn.to/2ZNMnIn
Books:
"Watchmaking" by Daniels: http://amzn.to/2FH3cyh
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
Soldering and Brazing (Workshop Practice, No 9): https://amzn.to/2MV7zsY
Workshop practice Series: http://amzn.to/2DyPs2D
Comments
Yet to be made :)
Clickspring
2019-09-29 02:51:26 +0000 UTCWhere's the last video? Love your work Chris!!!
Conor Keane
2019-09-29 01:48:48 +0000 UTCTerrific to hear that mate!
Clickspring
2019-06-13 20:01:27 +0000 UTCKeep up the good work, Chris! My old class is still using your prints. I'm actually going to be a tool and die maker erdie July, all because you've inspired me! Love your material! Never give up!inspired
Thomas Moore
2019-06-13 03:56:17 +0000 UTCThere's no particular benefit over the nearest metric or fine imperial threads, and you can generally move to the nearest equivalent without much issue. But like you, when I was setting up the shop for clockmaking I purchased a tap and die set that covers the whole BA range so its what I tend to use now rather than buy more taps/dies. This book: (Amazon affiliate link: https://amzn.to/2Mf1MPn ) is brilliant. There is a set of conversion charts at the back for all thread standards, that I refer to at least once a day. Whatever set you go for, you will be able to convert a given project to your tap and die set with ease - Cheers :)
Clickspring
2019-05-29 00:53:53 +0000 UTCI notice you use BA screws, the clock i'm planning for uses them and i was planning to buy a tap die set. Is there a reason you choose to use them here?
Philip Bouchon
2019-05-29 00:31:00 +0000 UTCDidn't see that! Thanks.
Joshua
2019-05-12 20:35:36 +0000 UTCHi Joshua, yes there are some buffering issues occasionally with Vimeo - try the direct video link for YT that is below the post text - Cheers :)
Clickspring
2019-05-12 20:23:42 +0000 UTCFor some reason since you've switched to Vimeo all your videos skip and stutter when I use Chromecast to send them to my tv. Never happened before π£
Joshua
2019-05-12 20:20:37 +0000 UTCThank you!
Clickspring
2019-05-07 20:13:43 +0000 UTCAwesome work. You explain technical things so well they ALMOST donβt look extremely delicate and complex.
Spacellama
2019-05-07 08:52:27 +0000 UTCHopefully soon - the process is excruciatingly slow, and entirely out of my control. Can't wait to share the detail :)
Clickspring
2019-05-06 08:27:02 +0000 UTCCheers mate :)
Clickspring
2019-05-06 08:24:33 +0000 UTCWhen will you be able to spill the beans on your secret project?
Clayton Firth
2019-05-06 07:43:49 +0000 UTCAwe inspiring work Chris. Canβt wait to see it assembled.
Clayton Firth
2019-05-06 07:43:09 +0000 UTCThanks, I figured that was the answer but it wouldn't hurt to ask.
Ben Manthey
2019-05-04 23:25:45 +0000 UTCCheers mate :)
Clickspring
2019-05-04 07:42:20 +0000 UTCVery nice, Chris. Be good to finally see it in action in the next video. :-) One suggestion: tinning each end of the split ring before threading the smaller ring onto it might help further reduce heat colouring of the smaller ring by making the final soldering together of the ends of the split ring easier and faster. Cheers.
Sean Kirby
2019-05-04 07:28:23 +0000 UTCYeah, that was particularly stunning camera work, even by Chris's usual high standards. :-)
Sean Kirby
2019-05-04 07:14:46 +0000 UTCTerrific to hear that mate :)
Clickspring
2019-05-04 04:20:31 +0000 UTCHi Ben, glad you enjoyed it, no on the SW files, I prefer to keep them controlled - Cheers :)
Clickspring
2019-05-04 04:20:07 +0000 UTCYou have given me motivation to at least try the hand tool before resorting to a power tool for almost ANY job!
Jeffro
2019-05-04 04:03:29 +0000 UTCBeautiful work as always
Jeffro
2019-05-04 04:02:51 +0000 UTCFantastic as always. Any chance of getting the Solidworks files? Thanks!
Ben Manthey
2019-05-04 03:37:43 +0000 UTCThanks for the answer! I really admire what you do. Taking the time not only to make these things and share them but also to answer questions about it is really inspirational.
Michael Fisher
2019-05-03 20:55:25 +0000 UTCHi Leo, water (generally as brine) gives a faster quench than oil, and so brings with it the slightly elevated risk of cracking, particularly for larger parts. Although for the steel used here (EN8) with a small screw, either quench medium would be ok. Definitely worth an OST, I will add it to the list - Cheers :)
Clickspring
2019-05-03 20:31:02 +0000 UTCHi Michael, I generally use Tix solder and flux (amazon links below) and I get the clock pins from Meadows and Passmore: <a href="http://m-p.co.uk" rel="nofollow noopener" target="_blank">http://m-p.co.uk</a> - Cheers :)
Clickspring
2019-05-03 20:23:06 +0000 UTCThank you John!
Clickspring
2019-05-03 20:20:17 +0000 UTCIs there a reason for quenching in oil instead of water? If so, the differences in various techniques might make for an interesting Old School Tips video... Also, is there a particular reason you decided not to blue the gnomon pin? Just wondering if it was a purely aesthetic choice or if there was some technical reason like wear on the part or something?
Leo G.
2019-05-03 06:05:11 +0000 UTCChris, I was just wondering what type/brand of solder and flux do you use? Also where do you get your tapered pins?
Michael Fisher
2019-05-03 02:29:06 +0000 UTCAmazing work Chris!
OldSaltyPossum
2019-05-02 23:17:53 +0000 UTCCheers mate :)
Clickspring
2019-05-02 19:59:27 +0000 UTCHa ha! Always a bit nerve wracking towards the end of a build! Cheers mate :)
Clickspring
2019-05-02 19:59:16 +0000 UTCThank you mate :)
Clickspring
2019-05-02 19:58:37 +0000 UTCCheers mate :)
Clickspring
2019-05-02 19:58:22 +0000 UTCCheers Max!
Clickspring
2019-05-02 19:58:04 +0000 UTCPrototype in progress :)
Clickspring
2019-05-02 19:57:49 +0000 UTCAnother great journey comes to an end! Can't wait for the next project :)
Boguslaw Smalec
2019-05-02 16:23:21 +0000 UTCWow. Those 18 minutes went by fast. Thank you, Chris!
Max Jonsson
2019-05-02 15:20:11 +0000 UTCahh perfect timing, just arrived from to watch more work-related videos :D I'm really excited to see this getting to completion!
Strothy2
2019-05-02 12:56:07 +0000 UTCGday Chris, I got nervous when you started to bend the arm why I don't know coz I knew you would pull it off TFS G :)
Graeme Brumfitt
2019-05-02 12:08:43 +0000 UTCwonderfully amazing, as always. Love it! thank you for sharing!
Joris van 't Land
2019-05-02 09:40:56 +0000 UTCExcellent as always! Thanks for sharing
Tom Wazny
2019-05-02 09:29:55 +0000 UTCYes certainly Markos, I will show how it is used in the next video - Cheers :)
Clickspring
2019-05-02 07:01:53 +0000 UTCExcellent Chris! I really like the close ups! Is there any chance you will show how to operate it, in particular reading the time with the sun?
Markos Skoulatos
2019-05-02 06:53:27 +0000 UTC<a href="https://www.youtube.com/watch?v=B8Y146v8HxE&list=PLZioPDnFPNsETq9h35dgQq80Ryx-beOli" rel="nofollow noopener" target="_blank">https://www.youtube.com/watch?v=B8Y146v8HxE&list=PLZioPDnFPNsETq9h35dgQq80Ryx-beOli</a> - Cheers :)
Clickspring
2019-05-02 05:33:19 +0000 UTCThank you mate :)
Clickspring
2019-05-02 05:33:08 +0000 UTCI'd like to view your clockmaking series again. How do I do that?
Greg Nixon
2019-05-02 05:27:50 +0000 UTCBrilliant video again. Awe inspiring machine work.
Greg Nixon
2019-05-02 05:23:50 +0000 UTCThank you mate! I found a nice threaded filter that gives me 2x on the camcorder, thrilled with how close it gets into some of the work shots :)
Clickspring
2019-05-02 02:53:35 +0000 UTCSimply STUNNING camera work on this one Chris! The close-up views are superb! This project could continue for years and I'd continue to watch it!
Brian Ullmark
2019-05-02 02:51:57 +0000 UTCThank you mate :)
Clickspring
2019-05-02 02:18:47 +0000 UTCChris, thank you for making me speechless with wonder, once again.
Leonard Solomon
2019-05-02 01:59:35 +0000 UTCCheers Ralph :)
Clickspring
2019-05-02 01:50:54 +0000 UTCYes - the next video will cover the start to finish of a new (to me) process, as well as a few things about the mechanism design that I modified from the prototype - Cheers :)
Clickspring
2019-05-02 01:50:05 +0000 UTCTwo things that really help me are 1./ Use a light to illuminate the work from above, and then lightly cross grain the surface to catch the light. When working, watch what happens to that cross grain with each stroke, it will tell you right away if you're dropping the cut left or right. 2./ Align the work with the natural lines of the shop (walls, bench, floor etc) Its surprising how much the peripheral cues subliminally affect what you do with your hands - There is a bit more detail on this here: <a href="https://youtu.be/h4KaiG7CpSQ" rel="nofollow noopener" target="_blank">https://youtu.be/h4KaiG7CpSQ</a> - Cheers :)
Clickspring
2019-05-02 01:48:25 +0000 UTCChris I see you use roll or round solder, have you ever used ribbon solder ? It is very thin and can be cut so you can put it in the joint and well save you clean up This has been quite a journey well done
Ralph McCoy
2019-05-02 01:45:32 +0000 UTCI generally use a leaded free machining brass, and yes it will shoot off as a fine powder at certain speeds and depth of cut. One thing I do to avoid this is go for max depth cuts wherever possible, with a relatively slow rpm. Brass will cut well at just about any speed, but slow with a deep cut gives nice big chips that fall away that are much easier to manage - Cheers :)
Clickspring
2019-05-02 01:41:57 +0000 UTCYes its a chunk of pumice
Clickspring
2019-05-02 01:36:44 +0000 UTCThank you Stefan!
Clickspring
2019-05-02 01:36:31 +0000 UTCWith the series coming to an end: Are there any plans on making a "Mistakes made and how I fixed them" video?
SkaveRat
2019-05-02 01:34:01 +0000 UTCChris, Practice Practice
Ralph McCoy
2019-05-02 01:32:51 +0000 UTCChris, when filing parts how do you keep from filing on an angle ??
Ralph McCoy
2019-05-02 01:31:44 +0000 UTCWhat alloy of brass do you use? You seem to get nice flaky chips from it, whereas the brass I have (mostly offcuts, maybe 385?) flies apart in an unholy powder that gets into everything...
Damien Miller
2019-05-02 01:30:51 +0000 UTCChris, when you are soldering what type of "rock" is that ?? pumice ??
Ralph McCoy
2019-05-02 01:30:38 +0000 UTCAwesome video, Chris!
Stefan
2019-05-02 01:27:55 +0000 UTC
